johnhudson wrote:What you have is fake raid. If you install Linux, you would be far better using mdadm. Some distros will set it up for you.
The main point is that, whatever RAID you use, you need matching drives.
nelz wrote:Matching in capacity and performance parameters (speed, cache size etc). It isn't strictly necessary, Linux software raid can cope with different sized drives, it ignores the extra space on the larger drives, but for best performance they should match.
They don't need to be fro the same manufacturer, in fact there is a school of thought that says they should be from different manufacturers. From time to time, any manufacturer can produce a batch with a higher failure rate, you don't want a RAID full of these, mixing makes can reduce the chance of multiple drive failures.
nelz wrote:Yes it does. If you have a proper hardware RAID controller you can use that, but if it is fakeraid steer well clear.
Users browsing this forum: No registered users and 3 guests